PrimeTool X 8.7 Download Unlock Samsung/Xiaomi FRP
PrimeTool X 8.7 – The Ultimate FRP Unlocking and Driver Installation Tool
If you are a mobile technician, you know the headache of Factory Reset Protection (FRP) locks. They are essential for security, but a nightmare when a customer forgets their Google credentials. Enter PrimeTool X 8.7, a powerful utility designed specifically to bypass these locks on Samsung and Xiaomi devices while automating the tricky driver installation process.
What makes this release significant? It removes the dependency on third-party tools like Zadig for Qualcomm devices. In version 8.7, the developer has streamlined the connection process, allowing you to connect directly via the standard Qualcomm HS-USB QDLoader 9008 port. This update, combined with support for the latest Samsung Android 16 firmware, positions PrimeTool X as a must-have in your 2025 software arsenal.
.webp "PrimeTool X 8.7 Download Unlock Samsung/Xiaomi FRP")
Real-Life Example The "Zadig" Headache is Gone
Let’s paint a picture. Last month, a technician brought in a Samsung Galaxy A05s for an FRP bypass. On older software versions, he had to stop halfway, download Zadig, manually replace the USB drivers, and pray the PC recognized the port. It took 20 minutes just to set up the connection.
With PrimeTool X 8.7, that scenario is obsolete. You simply install the included UsbDk and MTK drivers, plug the phone into Qualcomm 9008 mode, and the tool recognizes it instantly. The "Community" tab—which many found unnecessary—has also been stripped out to make the software lighter and faster. In our tests, the startup time is 30% faster than version 8.2.
Key Features of PrimeTool X
This tool isn’t just about FRP; it’s about stability and driver management. Here is what you can expect from the 8.7 release:
- No Zadig Required: Direct connection support for Qualcomm devices via HS-USB QDLoader 9008 port.
- Comprehensive Driver Pack: One-click installation for MediaTek and UsbDk drivers directly from the GUI.
- Samsung Android 16 Support: Ready for the latest firmware updates, including FRP removal for all Samsung devices running Android 16.
- Xiaomi Specialized Support: Dedicated FRP removal for popular Xiaomi models, specifically the Redmi A3 (Preloader/Brom mode).
- Modern GUI: A clean, simplified interface that removes clutter (the Community tab is gone) to focus on what matters: repairs.
- Multi-Brand Capability: While famous for Samsung, it includes robust support for Xiaomi and specific Motorola models.
Version Comparison: What’s Changed?
The jump from older versions (like 8.1 and 7.4.2) to 8.7 is more than just a number. Here is how the latest release stacks up against the previous builds.
PrimeTool X 8.7 vs. 8.2 & 8.1
| Feature | Version 8.1 / 8.2 | Version 8.7 (Latest) |
|---|---|---|
| Qualcomm Connection | Required Zadig tool for manual driver replacement to access EDL mode. | Native Qualcomm support. No Zadig needed; direct and stable 9008 port access. |
| Interface | Included a Community tab, increasing resource usage and load time. | Lightweight UI. Community tab removed for faster launch and smoother performance. |
| Samsung Support | Supported Samsung devices up to Android 13 / 14 with limited patch coverage. | Extended support. Full Android 16 FRP removal compatibility added. |
| Workflow | Multi-step process involving ADB enabling, manual checks, and patching. | Streamlined workflow. Simplified Enable ADB and Patch Device logic for quicker repairs. |
Which Version Should You Use?
Use Version 8.1 / 8.2 if:
- You’re working only on older Samsung models
- Android 13–14 devices are your main focus
- You’re comfortable using Zadig + manual EDL setup
Use Version 8.7 (Latest) if:
- You handle Android 15 / Android 16 devices
- You need Samsung Android 16 FRP removal
- You want faster workflow with fewer steps
- You prefer native Qualcomm 9008 support (no Zadig headaches)
Editor’s Recommendation:For 2026 repair work and future-proof support, Version 8.7 is the best choice.
Historical Updates (V8.2 & V7.4.2 Context)
For context, Version 8.2 was a massive update that introduced the "Enable ADB -> Remove FRP -> Patch" method which is still the backbone of the tool today. It added support for the Galaxy A05s series (A057F, A057G, A057M).
Version 7.4.2, released in late 2024, was pivotal for expanding support for the Redmi A3 and Redmi 13C, offering Preloader/Brom mode solutions that were hard to find elsewhere. Version 8.7 builds on this legacy by refining the stability of these connections.
Supported Device Models
PrimeTool X covers a wide range of devices. Below is a summary of the supported models included in the recent updates.
Samsung Devices
- Series A: Galaxy A02, A02s, A03s, A04, A04e, A05, A05s (A057F/U8/U9, A057G/U7, A057M), A06, A10s, A11, A20s, A23, A32.
- Note: Full bit support is available for most variants (Bit 4 through Bit 9).
Xiaomi Devices
- Popular Models: Redmi A1, A2, A3, 9A, 10 (2022), 12C, 13C, 14C, Note 12S.
- Android Support: Covers Android 11 through Android 15.
Motorola Devices
- Supported: Moto E22, E22i, G05, G15.
How to Use PrimeTool X for FRP Unlock
Using the tool is straightforward, but following the correct order is crucial to avoid driver conflicts.
Step 1: Install Necessary Drivers
Before connecting a phone, you must prepare your PC.
- Open PrimeTool X.
- Navigate to the Drivers tab.
- Click "Instalar" next to Driver MediaTek.
- Click "Instalar" next to Driver UsbDk.
- Wait for the confirmation message.
Step 2: Select Brand and Model
- In the main interface, choose Samsung or Xiaomi from the top menu.
- Select your specific model from the left sidebar (e.g., Galaxy A05s or Redmi A3).
Step 3: Connect and Erase FRP (Samsung Method)
For Samsung devices running Android 16:
- Enable ADB: Click the "Enable ADB" button. Follow the on-screen patch instructions.
- Remove FRP: Once ADB is active, click "Remove FRP."
- Patch Device: Click "Patch Device" to stabilize the connection and complete the unlock.
- Note: Ensure the device is powered on and in a "ready" state for these commands.
Step 4: Connect and Erase FRP (Xiaomi/Qualcomm Method)
- Power off the device completely.
- Press and hold the specific boot keys (usually Volume Up/Down) while plugging in the USB cable.
- The tool should detect the device in Preloader | Brom mode (or Qualcomm 9008 mode without Zadig).
- Click "Erase FRP".
- Wait for the progress bar to finish. The tool will automatically reboot the phone once the lock is removed.
Download PrimeTool X (All Versions)
Below you will find the latest release as well as previous versions for legacy device support.
Latest Release
Download 'PrimeTool X 8.7 With Drivers':
Previous Versions & Relaunches
Frequently Asked Questions (FAQ)
Is PrimeTool X free to use?
Yes, PrimeTool X is currently available as a free utility for mobile technicians, though some advanced features might be reserved for premium users in the future.
Do I still need Zadig for PrimeTool X 8.7?
No. One of the standout features of version 8.7 is that you no longer need the Zadig tool for Qualcomm devices. You can connect directly via the HS-USB QDLoader 9008 port.
Does this tool work on Windows 11?
Yes, PrimeTool X is compatible with Windows 10 and Windows 11. However, you must always run the tool as Administrator to ensure drivers install correctly.
What is the "UsbDk" driver used for?
UsbDk is a user-mode driver that allows the tool to communicate directly with USB devices, bypassing some of the limitations of standard Windows drivers. It is essential for the tool to function correctly.