NCK Unisoc Module v1.2 Released New Models & Fixes
NCK Online Tool Unisoc Module v1.2 Released: Better Flashing & New Models
The NCK Online Team has officially rolled out the Unisoc Module v1.2 on 29 January 2026. If you work in a mobile repair shop, this is a big update for you. This version focuses on making the flashing process much safer and fixing common bugs that used to damage phones.
Earlier, many technicians reported issues where Unisoc (SPD) phones would go dead or not turn on after flashing. This new update solves that problem by adding smarter detection features. It also brings support for many new phone brands like Blackview, Cubot, Lava, and Oukitel.
What’s New in Unisoc Module v1.2?
This release is not just about adding new models; it is about safety and speed. The developers have worked hard to reduce errors during the writing process. Here is a look at the main improvements in the Key Features section:
Key Features
- Better Flashing Stability: The process of writing firmware is now smoother and less likely to fail.
- Auto Storage Detection: The tool can now automatically find out if the phone uses UFS or eMMC storage.
- Auto SPL Loader Selection: You do not need to manually choose the loader file anymore. The tool picks the right one (UFS or eMMC) for you.
- Fixed Dead Phone Issue: Solved a major bug where phones would not boot up after flashing the PAC firmware.
- Fixed Write NV Error: Corrected errors that happened while writing NV data during factory firmware updates.
- Improved FRP Reset: The Google Account reset process now works better on supported models.
- Better Read Info: The tool now reads phone information more accurately.
Version Comparison: What Changed?
It is good to know how this version is different from the previous one. Here is a simple comparison:
- Previous Release: Users had to select the SPL loader manually. If they chose the wrong one (eMMC instead of UFS), the phone often died.
- New Release (v1.2): The tool detects the hardware and selects the loader automatically. This removes the risk of human error and saves time.
Real-World Example: How This Helps You
Let’s say a customer brings in a Blackview A85 that is stuck on the logo and needs a factory reset or new software.
In the past, you would have to check the phone's board to see if it has UFS or eMMC memory. If you guessed wrong and selected the wrong loader in the tool, the flashing would fail, and the phone would go dead. You would then need a special box to bring it back to life.
With NCK Online Tool v1.2, you just connect the phone. The tool sees it is a UFS device and selects the correct file by itself. You click "Write Firmware," and it completes without any error. The repair is done faster, and the customer leaves happy.
Newly Supported Brands and Models
This update adds a wide list of phones. Check if your customer's device is on this list.
Blackview
- Blackview A52 Pro
- Blackview A85
- Blackview BV4800 Pro
- Blackview Oscal C70
- Blackview Oscal C80
- Blackview Oscal Tiger 10
- Blackview Wave 8
Cubot
- Cubot A10
- Cubot KingKong ES
- Cubot Note 21
- Cubot Note 40
- Cubot Note 50
Lava
- Lava Shark
- Lava Yuva 2
- Lava Yuva 3
- Lava Yuva 4
Oukitel
- Oukitel C32, C33, C36, C51, C58, C58 Pro
- Oukitel G1, G2
- Oukitel OT11, OT12
- Oukitel RT9
- Oukitel WP23 Pro
- Oukitel WP28 E, WP28 S
- Oukitel WP32 Pro
Supported Operations
With this module, you can perform many tasks on Unisoc devices:
- Read Phone Info: Get full details about the hardware.
- Wipe / Factory Reset: Clean user data and passwords.
- Reset FRP: Remove Google Account lock.
- Backup & Restore Security: Save your security data before flashing.
- Read / Write Flash: Full read and write operations.
- Write Factory Firmware (PAC): Flash official stock ROMs.
- Diag Mode: Wipe or read info in Diagnostic mode.
- Repair IMEI: Fix invalid IMEI numbers (where allowed by law).
Why You Should Update Now
This update is very important because it stops the "dead phone" problem. If you flash a lot of Unisoc devices, the auto-detection feature will save you hours of work. It makes the tool safer for new technicians who do not know how to identify chip types manually.
Password:- NckTeam
Frequently Asked Questions (FAQ)
Q: Is the NCK Online Tool free to use?
A: The software usually requires an activation or a dongle. You need to check your login status to use the Unisoc module.
Q: What is the password for the downloaded file?
A: The password for the RAR or ZIP file is usually "NckTeam" (without quotes).
Q: Can this fix a bootloop on Oukitel WP32 Pro?
A: Yes, version 1.2 adds support for the Oukitel WP32 Pro. You can use the "Write Factory Firmware" function to fix bootloops.
Q: Do I need to select the loader manually now?
A: No. The new v1.2 has an auto SPL loader selection feature that picks the right file for UFS or eMMC automatically.