Repair IMEI on Redmi Note 12 Pro 4G (Sweet

Repair IMEI on Redmi Note 12 Pro 4G (Sweet_k6a) Without Losing Data

Repair IMEI on Redmi Note 12 Pro 4G (Sweet_k6a) Without Losing Data [Locked Bootloader | HyperOS]

If you're trying to repair the IMEI on Redmi Note 12 Pro 4G (Sweet_k6a) with HyperOS and a locked bootloader, this guide will help you do it without losing any data. Using DFT Pro Tool v5.08, you can safely fix your IMEI issue while keeping your files intact.

Why This Method Works

Without data loss
Works even if bootloader is locked
Fully compatible with HyperOS
Uses DFT Pro v5.08, a reliable mobile repair tool

Repair IMEI on Redmi Note 12 Pro 4G (Sweet_k6a) Without Losing Data

Requirements Before You Begin

Make sure you have the following tools and files:

Tool / File	Description
DFT Pro v5.08	Mobile servicing software for IMEI repair
Flash File 1	Initial firmware required to enable DIAG
Flash File 2	Final firmware for restoring system
USB Cable	For connecting your phone to the computer
PC or Laptop	Required for running DFT Pro
DIAG Mode Enabled	Must be turned on to access service functions

Step-by-Step Guide to Repair IMEI on Redmi Note 12 Pro 4G (Sweet_k6a)

Follow these steps carefully to fix the IMEI without factory reset or bootloader unlock:

Step	Description
Step 1	Enable DIAG Mode Dial the DIAG mode code specific to Xiaomi (Qualcomm) devices. Example: `##717717##` or via ADB.
Step 2	Launch DFT Pro v5.08 Open the tool on your PC and connect your phone via USB. Make sure DIAG mode is detected.
Step 3	Load & Flash First File Use “Multi Program” mode in DFT Pro to flash the first file. Check options like “Backup EFS Safe” and “Set Boot Prev Drive.” Wait for the flash to complete.
Step 4	Repair IMEI After flashing, go to the IMEI repair section. DFT will detect your phone in DIAG mode. Enter the correct IMEI and proceed.
Step 5	Flash Second File After IMEI repair, flash the second file to restore all system partitions. This completes the safe repair process.